Product Testing & Certifications

Please note, testing is constantly being updated.

If you have any questions, please contact Solar Innovations, Inc. directly for specifics and the most up-to-date information.

Note: Solar Innovations, Inc. can provide additional testing to those listed, if required.

Solar can also provide simulation results or preliminary results before actual final testing is completed.

Florida Approved  | Energy Star & NFRC | Miami NOA | TDI Approved | Acoustical


To view information on the Florida NOA Memorandum please visit our NOA Memorandum page. You can also perform a search by visiting the Florida Approval’s website.Click Here for Florida Approved Products Testing Chart.


Several SI products have been listed on Texas Department of Insurance’s website. TDI has approved several products to be installed along the Texas Gulf Coast. Products included: Flat Impact Wood Curtain Wall, 102 Degree Corner Wood Curtain Wall, 3×10 Aluminum Folding Glass Wall, Thermally Broken Aluminum Glass Door Panels, Poly Wall Twin Aluminum Window with Polycarbonate Infill, 3 ½’ x 9 ½’ Aluminum Folding Glass Wall, and Impact Resistant Pyramid Aluminum Fixed Skylights.

Curtain Wall and Store Front Systems Impact Resistant

Solar had previously been added to TDI’s website for our Curtain Wall Aluminum Panel, Impact Resistant, our Impact Resistant Curtain Wall Wood Panel, and our Impact Resistant Side Glazed Fixed Aluminum Skylight / Roof Window.


Glass and polycarbonate products can be used to reduce unwanted noise in homes and commercial businesses. To read about Solar Innovations, Inc.’s Acoustical Testing, click here.

90 Degree Operable Skylight TestingTerrace Door Impact Testing

Florida Approved  | Energy Star & NFRC | Miami NOA | TDI Approved | Acoustical

Product Testing Chart

Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI2000 Series Terrace Doors
SI2201Doors TerraceNCTL-110-9519-1s81 5/8″36 5/8″Florida Certified: 12278.1
G2 Folding Glass Wall Dual Wheel 3 x 8 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“Split Wall”NCTL-110-15005-1 96″ 36″±80FL Impact #’s

12278.9 – In – Steel12278.10 – Out – Steel12278.11 – In – Aluminum12278.12 – Out – Aluminum

FL Non-Imp #’s12279.712279.8

12279.9

12279.10

 

SI3350“All Wall”NCTL-110-14994-1
96″36″±80FL Impact #12278.6

FL Non-Imp #12279.6

SI3350“No Post”NCTL-110-14992-196″36″±80FL Impact #12278.7

Fl Non-Imp #12279.5

SI3350“Panic”NCTL-110-15135-196″36″ ±65 Added to series
SI3350“Radius”NCTL-110-12624-196″36″±80FL Impact #12278.8

FL Non-Imp #12279.11

SI3350“Radius Flush”NCTL-110-9445-196″36″±80N/A
G1 Single Wheel Folding Glass Wall 3×8 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“All Wall”NCTL-110-10114-1NCTL-110-10115-1NCTL-110-10116-196″35″±60FL Impact #12278.412278.5
Use this system for small units (windows, openings <7ft tall, etc)
G1 Single Wheel Folding Glass Wall 3.5×6 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“All Wall”NCTL-110-14076-170 1/8″40 1/2″±60N/A
G1 Single Wheel Folding Glass Wall 3.5×9.5 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“Split Wall”NCTL-110-12655-1114″43 7/8″±60FL Impact #
12278.2

FL Non-Imp #
12278.3

SI3350“Flush Sill”NCTL-110-12655-2114″44 7/8″±60FL Impact #
11278.2

FL Non-Imp #
11278.3

G3 Dual Wheel Folding Glass Wall 3.5×9.5 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“Split Wall”NCTL-110-15327-2118″36 1/2″±70 FL Impact #13407.1 (Lite)13407.2 (In)13407.3 (Out)

FL Non-Imp #
14399.3 (Lite)
14399.4 (Out)
14399.5 (In)

SI3350“No Post”Coming Soon118″36 2/16″±60 FL Impact #
13407.4 (Standard)13407.5 (Flush)

FL Non-Imp #
14399.1 (Standard)14399.2 (Flush)

G1 Single Wall Folding Glass Wall 3×10 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“Split Wall”NCTL-110-12356-1120″36″ ±58FL Impact #
12278.1

FL Non-Imp #12279.412279.13 

SI3350“Swing Doors”NCTL-110-14463-1
120″36″±60FL Impact #
12278.1

FL Non-Imp#12279.412279.13

G2 Dual Wheel Folding Glass Wall 3×10 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“No Post”NCTL-110-15409-1
120″36″±60FL Impact #
N/A

FL Non-Imp #
12279.12

G1 Single Wheel Folding Glass Wall 4×10 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“All Wall”NCTL-110-12566-1120″48″N/AN/A
G2 Single Wheel Folding Glass Wall Irregular Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“Swing Door”NCTL-110-9445-1
84 1/8″30 1/16″±120FL Impact #
N/A

FL Non-Imp #
12279.3

SI3350“Swing Door”NCTL-110-12567-1
82 1/8″32 15/16″±135FL Impact #
N/A

FL Non-Imp #
12279.3

G2 Dual Wheel Folding Glass Wall Thermal
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“All Wall”NCTL-110-14592-1
74″36 3/8″N/AN/A
G1 Single Wheel Folding Glass Wall Thermal
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350“All Wall”NCTL-110-9519-283 15/16″66 1/4″N/AN/A
SI3350“All Wall”NCTL-110-10850-174 1/2″33 1/2″N/AN/A
G2 Pivot Door 5×8 Panel
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350P“Pivot Door”NCTL-110-12566-1100.875″62.5625″‘+150-120 Throwbolt
±45 No Throwbolt
FL Non-Imp #
12279.15
G2 Stacking Glass Wall
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI3350S“Stack Wall”NCTL-110-12568-1100.875″62.5625″±60FL Non-Imp #
12279.14
SI4000 Series Polycarbonate Products
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI430660mm Poly SkyliteNCTL-110-12568-299 1/4″99 1/4″±60psfFlorida Certified: 13895.1
Impact Tested
SI4308Translucent Panel System ModularNCTL-110-12568-199 1/4″99 1/4″±60psfFlorida Certified: 13895.2
SI4308Translucent Panel System ModularNCTL-110-12568-299 1/4″99 1/4″±60psfFlorida Certified: 13895.1
Impact Tested
SI4308Translucent Panel System ModularNCTL110-12668-2s
NCTL110-12668-1s
80″80″
SI5000 Series Glass Structures
Solar Innovations, Inc. Curtain Wall system with a standard configuration is limited to 12psf water. Additional configurations may be available depending on your structure design and engineering up to 20psf.
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI5200Curtain Wall Series



NFRC Certified
SI52002″ sloped/vertical tube systemNCTL-110-11054-199″51″Florida Certified: 11260.1
11260.2
SI52002″ sloped/vertical tube systemNCTL-110-11054-299″51″Florida Certified: 11260.1
11260.2
SI52002″ sloped/vertical tube systemNCTL-110-11054-399″51″Florida Certified: 11260.1
11260.2
SI52002″ sloped/vertical tube systemNCTL-110-11054-499″51″Florida Certified: 11260.1
11260.2
SI52002″ sloped/vertical tube systemNCTL-110-11054-599″51″±60psfFlorida Certified: 11260.1
11260.2
Impact Tested
SI52002″ sloped/vertical tube systemNCTL-110-11054-699″51″±60psfFlorida Certified: 11260.1
11260.2
Impact Tested
SI52002″ sloped/vertical tube systemNCTL-110-11054-799″51″Florida Certified: 11260.1
11260.2
SI52002″ sloped/vertical tube systemNCTL-110-11055-199″51″±60psfImpact Tested
SI52002″ sloped/vertical tube systemNCTL-110-10138-2s72″48″
SI5250W2.5″ wood systemNCTL-110-12880-0178.74″78.74″
SI5250W2.5″ wood systemNCTL-110-12404-158 1/4″58 1/4″+40
-45
Florida Certified: 13582.1
SI5250W2.5″ wood systemNCTL-110-12404-2130″127 1/4″+40
-45
Florida Certified: 13582.2
SI5250W2.5″ wood systemNCTL-110-12404-358 1/4″58 1/4″±50psfFlorida Certified: 13582.1
13582.2
Impact Tested
SI5250W2.5″ wood systemNCTL-110-11055-799″51″±60psfFlorida Certified: 13582.1
Impact Tested
SI5250W2.5″ wood systemNCTL-110-11055-699″51″Impact Tested
SI5250W2.5″ wood systemNCTL-110-11055-599″51″Impact Tested
SI5250W2.5″ wood systemNCTL-110-11055-499″51″
SI5250W2.5″ wood systemNCTL-110-11055-399″51″
SI5250W2.5″ wood systemNCTL-110-11055-299″51″
SI5250W2.5″ wood systemNCTL-110-13134-1±40psf
SI5250W2.5″ wood systemNCTL-110-12881-1s79″79″
SI53063″ sloped/vertical tube systemNCTL-110-9901-184 1/2″84 1/4″±20psf
±40psf
±80psf
SI53063″ sloped/vertical tube systemNCTL-110-11306-1147 3/4″99 1/4″Florida Certified: 11259.1
SI5600Skylight Variable Pitch, Welded CurbNCTL-110-11306-2147 3/4″99 1/4″±65psfImpact Tested
SI5800Skylight Fixed Pitch, Welded CurbNCTL-110-9647-186 1/4″86 1/4″±40psf
±80psf
Florida Certified: 11259.2
SI5800Skylight Fixed Pitch, Welded CurbNCTL-110-9647-286 1/4″86 1/4″
SI5900Skylight Flat Welded CurbNCTL-110-10138-1s72″48″
SI5900Skylight Flat Welded CurbNCTL-110-11305-1s98″50″±40psf
±75psf
Florida Certified: 11259.2
SI5900Skylight Flat Welded CurbNCTL-110-11305-2Impact Tested
SI7000 Series Windows
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI7202Window ProjectedNCTL-110-9531-3s
SI7202Window ProjectedNCTL-110-9531-4s
SI7202Window ProjectedNCTL-110-9531-1
SI7251European SystemNCTL-110-12031-1s±60psf
SI72551Euro-Window
Energy Star Certified
SI7256Lift and Slide Operable Door
Acoustically Test #
B3272.01-113-11 
SI7400Mulled Window SystemEnergy Star Certified
SI8000 Series Sliding Glass Doors
Series #DescriptionNCTL Report NumberPanel
Height
Panel
Width
Design
Pressure
Additional Credentials
SI8201HPSliding System Multi TrackNCTL-110-10818-296″48 1/8″±60psfFlorida Certified: 12280.1
Impact Tested
SI8500Sliding System Dual TrackNCTL-110-10836-0178.74″78.74″NFRC Certified
Energy Star Certified
SI8500Sliding System Dual TrackNCTL-110-10819-1s93 1/4″61 3/4″±40psf
SI8500Sliding System Dual TrackNCTL-110-10837-1s79″79″Energy Star Certified
SI8600G3 Sliding Glass Door
Acoustical Test #
C2184.01-113-11

Note: Solar Innovations, Inc. can provide additional testing to those listed, if required.  Solar can also provide simulation results or preliminary results, before actual final testing is completed.

Solar Innovations, Inc. uses the National Accreditation Manufacturing Institute, or NAMI, to attest to Solar Innovations, Inc.’s Quality Assurance program.  NAMI specializes in fenestration products, which includes, but is not limited to, windows, patio doors, skylights, sidelights, entrance doors, transoms, glazing wall systems, site-built products, and insulating glass.  NAMI, as a certification agency, is required to operate its certification programs under ISO Guide 65 and ISO Standard 17020. Solar Innovations, Inc. is certified by the National Accreditation and Management Institute, which is both ANSI and IAS accredited for both of those standards.  As a participant of NAMI, the National Accreditation and Management Institute requires Solar Innovations, Inc.’s  Quality Assurance Program to comply with ISO Guide 53.

Other standards, such as ISO 9001 monitors the internal Quality Management System of a manufacturer within many groups.  NAMI, not only externally monitors Solar Innovations, Inc. Internal Quality Management System, but is also an external source of inspection of our product for certification to standards expressly for the type of products (Fenestration) which Solar Innovations, Inc. manufactures.

Solar Innovations, Inc. will continue to ensure the quality of our products through the voluntary participation in the National Accreditation and Manufacturing Institute’s program.  As a proud manufacturer of NAMI, NFRC, and ENERGY STAR qualified products, Solar Innovations, Inc. stands behind the quality of the products we deliver to customers.

We will be happy to assist you or answer any questions. Please call 800-618-0669 or e-mail us at info@solarinnovations.com.

Back to Top

All text, graphics, images, animation, videos, and other works on this website are the copyrighted works of Solar Innovations, Inc. All Rights Reserved. Any unauthorized redistribution or reproduction of any copyrighted materials on this website is strictly prohibited. The trademarks, logos, and service marks (collectively the "Trademarks") displayed on the website are Trademarks of Solar Innovations, Inc. and/or its affiliates. Some Trademarks appear on the website with permission from their respective owners. Nothing contained on the website should be construed as granting any license or right to use any Trademark displayed on the website. Unauthorized use of the Trademarks is strictly prohibited and may constitute trademark infringement. All drawings included in this website are the exclusive sole property of Solar Innovations, Inc., and are considered both confidential and proprietary. Any use of the information, design or drawings contained herein for any purpose whatsoever without the expressed written consent of a Solar Innovations, Inc. authorized individual is forbidden.